ICT and Electrical Systems

Low voltage system wires and cables are usually identified by markers that are installed using one or two cable ties. The benefit of this solution is that a single size marker can be used regardless of the cable diameter. You can produce your own markers on site using a Partex printer, or order them ready printed from us. We can offer standard or halogen-free versions.

Industrial cameras can be identified with foam backed labels. Partex EPL labels are suitable for both indoor and outdoor applications. The label is flexible and has very strong adhesive. It can also be attached to curved surfaces, which is crucial for many applications.

Foam backed labels or engraved plates are perfect as nameplates and to identify system boxes used in fire signalling, CCTV, access control or emergency escape systems. These labels are 0.8 mm thick, and offer perfect adhesion to curved or uneven surfaces, such as powder-coated doors or panel fronts.

For simple identification of modular components, such as fuses, circuit breakers, etc., use self-adhesive labels printed on a portable Partex printer. If the marker is to hold more data, then you may need a larger foam backed label, or an engraved plate.

Single cores inside cabinets are usually marked using single digit markers, i.e. pre-printed markers that can be arranged in any combination required. We manufacture two types of single digit markers: markers that fit over the end of the cable before it is connected, and markers for pressing or latching on to an already connected cable. Several sizes of each type are available to fit a wide range of cable diameters. These markers are also available in safe, halogen-free versions.

Electrical and Ethernet sockets can be identified with self-adhesive polypropylene or foam backed labels, printed on a thermal printer.